Table of Contents
Advertisement
CDM-750 Advanced High-Speed Trunking Modem
Ethernet Management
6.5.4.4.2
Status | Logs
The 'Status | Logs' page (Figure 6-9) provides control over how faults, alarms, and stored
statistics are processed by the unit. The user is also able to configure Alarm Masks for the unit
with this page.
Events Log
The scrollable window in this section provides a visual records of stored events. Up to 255 events
may be displayed, sorted by order of occurrence in blocks of five. Note the following:
•
Read Next Five Events: Select to buffer the next group of five stored events into the
scrollable Events window
•
Clear Events Log: Select to purge the stored events log
•
Initialize Events Pointer: Select to reset the log's internal pointer
•
Unread Events: Displays the total number of unread stored events in the Events
window. As stored event groups are displayed, this number decrements accordingly.
Once the desired settings have been entered, click [Submit] as needed to execute update of the
scrollable window contents.
Alarm Mask
Set an available alarm as Alarm, Fault, or Mask (plus Fault (Tx On) for Decompression). Once
the desired behavior has been selected, click [Submit Alarm Mask] as needed to execute update
of the unit's handling of faults and alarms.
Figure 6-9. Status | Logs page
6–17
Revision 1
MN-CDM750
Advertisement
Table of Contents
