Limit Monitor - Siemens SIMOCODE pro Operating Manual

Parameters
4.8 Logic modules
4.8.11

Limit monitor

Description
With the limit monitor, any analog values (2 bytes / 1 word) can be monitored for limit
overshooting or limit undershooting The limit monitor issues the "Limit" signal at its socket. In
addition, limit monitors can be "marked" according to their function.
Example: Monitoring the individual sensor measuring circuits of the temperature module
(Temperature 1 to 3) for overtemperature.
The limit monitor consists of:
● one analog plug
● one logic component
● one socket
The following are available:
● four limit monitors (1 to 4) for the SIMOCODE pro V PB and pro V MB RTU basic units
● six limit monitors (1 to 6) for the SIMOCODE pro V PN and pro V EIP basic units
256
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001