Siemens SIMOCODE pro Operating Manual page 89

Settings
You will find detailed explanations of the settings in Chapter Application selection, settings
and definitions of control functions (Page 66).
Table 4- 15 Star-delta reversing starter settings
Star-delta reversing starter
Voltage display (in the device
configuration)
Motor control → Control function:
OFF
ОN >
ON <
FB ON
Non-maintained command mode
Saving change-over command
Separate fail-safe function from control
function
Load type
Feedback time
Execution time
Change-over pause
Interlocking time
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Description
Select "Line-to-line voltage"
Control command OFF
Connection with any socket, usually with "Enabled control command OFF" socket
Control command ON >
Connection with any socket, usually with "Enabled control command ON >"
socket
Control command ON <
Connection with any socket, usually with "Enabled control command ON <"
socket
"Feedback ON" auxiliary control input
Connection with any socket, usually with "Status - current flowing" socket
Deactivated (default setting)
•
Activated
•
Deactivated (default setting)
•
Activated
•
Deactivated (default setting): A safety-related tripping by the DM-F modules
•
also affects the SIMOCODE pro control function, avoiding additional follow-on
fault messages. This setting is selected for applications where safety-related
tripping directly affects the motor controlled by SIMOCODE pro.
Activated: A safety-related tripping by the DM-F modules does not affect the
•
SIMOCODE pro control function. This setting is selected for applications
where safety-related tripping does not affect the motor controlled by
SIMOCODE pro.
You can choose between:
Motor (default)
•
Resistive load (see Chapter Application selection, settings and definitions of
•
control functions (Page 66))
Range 0 to 25.5 s (default: 0.5 s)
Range 0 to 6553.5 s (default: 1 s)
Range 0 to 655.3 s (10 ms steps) (default: 0 s)
Range 0 to 255 s (default: 0 s)
Parameters
4.2 Motor control
89