Siemens SIMOCODE pro Operating Manual page 193

Application examples
Among other things, you can monitor the following motor components:
● Motor windings
● Motor bearings
● Motor coolant temperature
● Motor gearbox oil temperature
The individual temperatures of the three sensor measuring circuits can be monitored
independently of each other by connecting free limit monitors.
Settings
Table 4- 63
Temperature module
Sensor type
Response
Number of active sensors
1) see Table "Sensor fault / Out of range response"
Table 4- 64
Response
disabled
signaling
warn
tripping
delay
See also "Tables of responses of SIMOCODE pro" in Chapter Important information
(Page 7).
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Temperature module input settings
to sensor fault/out of range
1)
"Sensor fault / Out of range" response
Description
PT100 (default), PT1000, KTY83, KTY84, NTC
Disabled, signal, warn (default), tripping
1 sensor, 2 sensors, 3 sensors (default)
Sensor fault/Out of range
X (d)
Parameters
4.5 Inputs
X
X
X
—
193