Opc Ua Receive - Siemens SIMOCODE pro Operating Manual

Parameters
4.5 Inputs
4.5.9

OPC UA Receive

Description
In addition to "Cyclic Receive," it is possible to transfer further data to SIMOCODE pro via
OPC-UA. With the "OPC UA Receive" function block, you can specify which information will
be further processed in SIMOCODE pro. For this, you only have to link the sockets of the
"OPC-UA Receive" function blocks to any other function blocks in SIMOCODE pro.
The "OPC-UA Receive" function blocks consist of:
● Eight bits each (= two bytes, byte 0 and byte 1 for binary information)
● One word (= two bytes, byte 2 to 3 for an analog value, freely parameterizable).
A total of three "OPC-UA Receive" function blocks (0, 1, 2/3) are provided.
Schematic
The following schematic shows the "OPC-UA Receive" function blocks:
Figure 4-71
198
Schematic of the "OPC-UA Receive" function blocks
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001