Siemens SIMOCODE pro Operating Manual page 26

Software for parameterization, control, diagnostics and testing
3.1 Software packages
SIMOCODE ES 2007
SIMOCODE ES provides the SIMOCODE pro motor management system with a user-
friendly and clear user interface with which to configure, operate, monitor and test
SIMOCODE pro in the field or from a central location via PROFIBUS. By displaying all
operating, service and diagnostics data, SIMOCODE ES supplies important information on
whether maintenance work is required or, in the event of a fault, helps to prevent faults or to
localize and rectify them once they have occurred.
Unnecessary plant downtimes can be prevented by changing parameters online (even
during operation).
In addition, the graphical editor enables extremely ergonomic and user-friendly
parameterization by dragging and dropping: Inputs and outputs of function blocks can be
linked graphically and the parameters set. Configured functions can be described in detail
and device parameterization can be documented graphically using comments. This speeds
up commissioning and simplifies plant documentation. The optimized user interface and
integrated graphic editor are used to assign parameters.
Further functions: Operation, diagnostics, testing, S7 routing, teleservice via MPI, STEP-7
object manager.
The following software packages are available:
● SIMOCODE ES 2007 Basic
● SIMOCODE ES 2007 Standard
● SIMOCODE ES 2007 Premium.
See also Software components (Page 28) for more information.
You will find a demo version and the latest updates on the Internet at Support
(http://www.siemens.com/simocode).
OM SIMOCODE pro Object Manager
The OM SIMOCODE pro Object Manager is a component of SIMOCODE ES. When
SIMOCODE ES and OM SIMOCODE pro are installed on a PC / PG, SIMOCODE ES can be
called directly from STEP 7 HW Config, This enables simple and universal SIMATIC S7
configuration.
26
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001