Siemens SIMOCODE pro Operating Manual page 27

SIMOCODE pro PCS 7 library
The SIMOCODE pro PCS 7 function block library is used to simply and conveniently
integrate SIMOCODE pro into the SIMATIC PCS 7 process control system. The
SIMOCODE pro PCS 7 function block library contains the diagnostic and driver blocks that
correspond to the diagnostic and driver concept of SIMATIC PCS 7 and the elements
(symbols and faceplates) necessary for operating and monitoring. The application is
integrated by graphic interconnection using the CFC Editor.
Signal processing and technological functions of the SIMOCODE pro PCS 7 function block
library are based on the SIMATIC PCS 7 standard libraries (Driver Blocks, Technological
Blocks) and are optimized for SIMOCODE pro. Users who until now have configured motor
feeders in conventional technology via signal blocks and motor or valve blocks can thus
easily change to the SIMOCODE pro PCS 7 block library.
The SIMOCODE pro PCS 7 block library supplied on CD-ROM allows the user to run the
required engineering software on an engineering station (single license) including the
runtime software for executing the AS modules in an automation system (single license). If
the AS blocks are to be used in additional automation systems, the corresponding number of
runtime licenses are required, which are supplied without a data medium.
Note
The PCS 7 libraries are subject to continual updating and improvement.
You can download the current service packs and hot fixes from Support
(http://www.siemens.com/simocode)→ Software.
Note
Observe the respective system versions!
GSD file
To integrate SIMOCODE pro as a standard slave into SIMATIC S7 or any standard DP
master system (automation system). The latest version is on the Internet at GSD file
(http://www.siemens.com/profibus-gsd). Further information on integrating DP slaves can be
found in the automation system documentation.
Win SIMOCODE DP converter
Software tool for converting "old" Win SIMOCODE DP parameter files (3UF5 device series)
into SIMOCODE ES parameter files for SIMOCODE pro.
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Software for parameterization, control, diagnostics and testing
3.1 Software packages
27