Siemens SIMOCODE pro Operating Manual page 25

SIMOCODE ES in the TIA Portal
SIMOCODE ES is the central software for configuration, startup, operation and diagnostics
of SIMOCODE pro with PROFIBUS, PROFINET, EtherNet/IP and Modbus RTU.
In addition to SIMOCODE ES Version 14, which is based on the Totally Integrated
Automation Portal (TIA Portal) central engineering framework, the 2007 version of the
software continues to be available for PROFIBUS and PROFINET for the commissioning,
operation and diagnostics of SIMOCODE pro (see below).
SIMOCODE ES V12 and V13 licenses can also be used for SIMOCODE ES V14.
SIMOCODE ES is integrated seamlessly when further TIA Portal-based software such as
STEP 7 or WinCC is available, thus enabling users to achieve a consistent, efficient and
intuitive solution for all automation tasks.
But also users of SIMOCODE ES as standalone software will benefit from its advantages.
You can choose between different versions of SIMOCODE ES.
The following software packages are available:
● SIMOCODE ES Basic
● SIMOCODE ES Standard
● SIMOCODE ES Premium.
While SIMOCODE ES Basic is a powerful tool for startup or maintenance personnel,
SIMOCODE ES Standard and Premium are the perfect tools for engineers or configuration
engineers on account of their larger scope of functions and integrated graphics editor. Unlike
the Standard version, SIMOCODE ES Premium also permits parameterization and
diagnostics through PROFIBUS, PROFINET and EtherNet/IP. Indication of all operating,
service and diagnostics data supplies important information about the current state of the
motor and plant at all times – everywhere on the communication bus.
The graphics editor is a part of SIMOCODE ES Standard and SIMOCODE ES Premium. It is
based on the Continuous Function Chart (CFC) and adds a powerful tool to the
parameterizing interface that enables easy parameterization of devices by drag & drop.
Extremely compact documentation of all configured parameters is possible, as is the graphic
online presentation of the configured device functions including all signal states during
operation.
The software includes a SIMOCODE ES Premium trial license. The Licensee is granted the
non-exclusive, non-transferable right to install the software in one (1) instance and to use the
installed software for validation purposes in the manner as specified in the order data or in
the CoL (see "Type of use"). The time of use shall be limited to 21 days, commencing at the
time when the software was first started, unless another time of use is specified in the order
data or in the CoL.
You will find a demo version and the latest updates on the Internet at Support
(https://support.industry.siemens.com/cs/ww/en/view/109347377).
The software is offered for downloading in the form of the SIMOCODE ES V14.zip file. After
unpacking the *.zip file, read the Readme.htm file first. Then launch the Start.exe program.
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
Software for parameterization, control, diagnostics and testing
3.1 Software packages
25