Siemens SIMOCODE pro Operating Manual page 185

Application examples
The inputs can be used, for example, for connecting the start and stop buttons of the local
control station, which can then be assigned to the "Local Control Station" function block.
If assigned accordingly, the input signals can also be used to activate function blocks such
as "Reset" or "External Fault."
Power supply to the inputs
See Chapter "Wiring basic units, expansion modules and the decoupling module" in
the SIMOCODE pro system manual.
Settings
Table 4- 59
Inputs
Debounce time
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
"Basic unit inputs" settings
Description
You can set a debounce time for the inputs, if required. Range: 6, 16, 26, 36 ms
(default: 16 ms)
Parameters
4.5 Inputs
185