Timer - Siemens SIMOCODE pro Operating Manual

Parameters
4.8 Logic modules
4.8.6

Timer

Description
The timer consists of:
● two plugs (input and reset)
● one socket
● one "Actual value" analog socket with the actual value.
The current actual value is available as a socket for further internal processing and can also
be transmitted to the automation system.
If an input signal is pending, the timer issues an output signal according to the chosen timer
type:
● With closing delay
● With closing delay with memory
● With OFF delay
● With fleeting closing
The following are available:
● two timers (1 to 2) for the SIMOCODE pro C and SIMOCODE pro S basic units
● four timers (1 to 4) for the SIMOCODE pro V PB and pro V MB RTU basic units
● six timers (1 to 6) for the SIMOCODE pro V PN and pro V EIP basic units.
242
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001