Counter - Siemens SIMOCODE pro Operating Manual

Parameters
4.8 Logic modules
4.8.5

Counter

Description
Counters are integrated in the SIMOCODE pro system. These are activated via the plugs "+"
or "-".
The counter output switches to "1" when the preset limit is reached. The counter is reset with
"Reset".
The current actual value is available as a socket for further internal processing and can also
be transmitted to the automation system.
● Plug +: Increases the actual value by 1 (maximum: limit).
● Plug –: Reduces the actual value by 1 (minimum: 0).
● Reset: Resets the actual value to 0.
The counter consists of
● three plugs (input +, input – and reset)
● one logic component
● one socket
● One "Actual value" analog socket with the current value in the range between 0 and the
limit. The value is retained even in the event of a power failure.
The following are available:
● two counters (1 to 2) for the SIMOCODE pro C and pro S basic units
● four counters (1 to 4) for the SIMOCODE pro V PB and pro V MB RTU basic units
● six counters (1 to 6) for the SIMOCODE pro V PN and pro V EIP basic units.
240
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001