Counter Screen - Siemens SIJECT 16i Operation Manual

SIJECT OP15B Screens

3.1.6 Counter screen

Operating sequences
3-20
Fig 3-20 Counter screen
Press this key to enter the counter screen. See Fig 3-20 Counter screen.
Part count and part numbers for each mold can be set on this screen.
Part counter (Part Count)
Part numbers for each mold (Part Nr/Mld)
for each mold.
Shots counter (Shot Count) – Display the number of shots.
Parts of this power on (Parts from Startup) – Display the production
quantity of current power on.
Softkey F1 Clear shot. Press this key, and the injection time will be
reset.
Softkey F2 Clear part. Press this key, and the part count will be reset.
Set the production quantity.
Set the production quantity
SIJECT 16i Operation Manual