Operating Mode Selection During Startup / Restart; System Information Changes - Polycom DOC2558C Hardware Manual

Polycom RMX 2000 Hardware Guide

Operating Mode Selection During Startup / Restart

When started with Version 7.x installed, the RMX enters MPMx Mode by
default when no media cards are installed.
•
The RMX switches between MPM, MPM+ and MPMx Card Configuration
Modes when MPM/MPM+/MPMx cards are removed or swapped while the
system is running.
• The switch between Card Configuration Modes occurs during the next
restart.
•
Installing or swapping MPM/MPM+/MPMx cards while the system is off will
not cause a switch in the Card Configuration Mode when the system is
restarted – it will restart in the Card Configuration Mode that was active
previous to powering down.

System Information Changes

The System Information includes License Information, and general system
information, such as system memory size and Media Card Configuration
Mode, which in version 7.0 includes the MPMx Mode.
Table 6 summarizes the Operating Mode After Next Restart resulting from of
adding or swapping MPM/MPM+/MPMx cards in a running system.
Table 6 RMX Card Configuration Mode After Next Restart
Current Media
Operating Cards
Mode Installed
MPM
MPM+
MPM and
MPMx
MPMx
MPM+ and
MPMx
Card(s) Card(s)
Supported Disabled
None All
None All
MPMx Only MPM
MPMx Only MPM+
Operating
Mode After
Next Restart
MPM
MPM+
MPMx
MPMx
1-19