Maximum Value/Minimum Value Hold Function - Mitsubishi Electric MELSEC iQ-R User Manual

1.10

Maximum Value/Minimum Value Hold Function

Medium speed Low speed
This function stores the maximum and minimum values of digital operation values for each channel in the buffer memory.
In the simultaneous conversion mode or inter-module synchronization mode, the maximum and minimum
values of the digital output values are stored.
Resetting the maximum value and the minimum value
Turn on and off 'Maximum value/minimum value reset request' (YD) or 'Operating condition setting request' (Y9) to replace the
maximum value and minimum value with the current values.
Turning on 'Maximum value/minimum value reset request' (YD) turns on 'Maximum value/minimum value reset completed
flag' (XD).
Values to be the maximum value and the minimum value
The maximum and minimum values of digital operation values are stored in the buffer memory.
When the digital clipping function, scaling function, shift function, or difference conversion function is used, the maximum
value and minimum value obtained after the operation processing of each function are stored.
Simultaneous
Synchronization
conversion
1.10 Maximum Value/Minimum Value Hold Function
1
1 FUNCTIONS
51