Setting Function Mode; Function Mode - Mitsubishi Electric P93W Operation Manual

9

SETTING FUNCTION MODE

Function mode

In this mode, the initial setting value of each function can be
changed. Each time the FUNC button is pressed, the mode is
switched as follows.
less than 1 second
Selection of the memorized
Selection of the memorized
multi image copy printing *1
Setting of the horizontal print
area for the enlarged image *2
Setting of the vertical print
area for the enlarged image *2
Printing of the setting values
*1 Displayed only when the MODE switch is set to MULTI.
*2 Displayed only when the enlarging print is set.
SIDE NOR 1:1
SIZE
MULTI SINGLE EXP.
MODE
OPEN
Press the FUNC button for
Stand-by status
curve setting
image for copy printing
BRT
PRINT
ADJUST BRT CONT FUNC FEED COPY
CONT
EXP.
more than 1 second
SCAN setting
IMAGE setting
DIRECTION setting
SAVING setting
PAPER setting
PRINT button function setting
Setting of the number of prints
Setting of the mode table printing
16