Mitsubishi Electric MELSEC iQ-R User Manual page 200

Condition target channel setting [n]
High speed
Set a channel where an interrupt is detected.
Setting value
0
1
2
3
4
When an interrupt factor with channel specification is set in 'Condition target setting [n]' (Un\G232 to Un\G247), an interrupt
factor is monitored in the channel set by this area. When an input signal (X) is set as an interrupt factor, the setting in this area
is ignored.
If a value other than the above is set, a condition target channel setting range error (error code: 182H) occurs. When a
condition target channel setting range error (error code: 182H) occurs in the normal mode (high speed: 1s/CH), the A/D
conversion stops in all channels.
"n" indicates an interrupt setting number. (n = 1 to 16)
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Condition target channel
setting [n]
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is All channels (0) for all areas.
Continuous logging cycle setting value
Simultaneous
conversion
Set a cycle for storing data logged by the continuous logging function collectively for all channels.
■Setting range
The setting range is from 1 to 1000.
• The value 0 is regarded as 1.
• A value within the range of 1001 to 65535 is regarded as 1000.
The continuous logging cycle is the value obtained by the value in this area  5s (conversion cycle). Thus, the actual
continuous logging cycle can be set within the range of 5s to 5000s.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Continuous logging cycle setting value
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 1.
APPX
198
Appendix 3 Buffer Memory Areas
Simultaneous
Low speed
conversion
1 2 3 4
264 265 266 267
Synchronization
Setting details
All channels
CH1
CH2
CH3
CH4
5 6 7 8 9
268 269 270 271 272
CH1 CH2
280
10 11 12 13 14
273 274 275 276 277
CH3
15 16
278 279
CH4