Manual Page Organization - Mitsubishi Electric MELSEC iQ-R User Manual

MANUAL PAGE ORGANIZATION

In this manual, pages about functions, I/O signals, and buffer memory areas are organized and the symbols are used as
shown below.
The following illustration is for explanation purpose only, and should not be referred to as an actual documentation.
 The following table lists the operation modes of the A/D converter module in which the corresponding functions and buffer
memory areas can be used. Each icon indicates an operation mode as follows.
Icon
Common
High speed
Medium speed
Low speed
Simultaneous
conversion
Synchronization
For details on each mode, refer to the following.
Page 15 Modes
14
Description
The corresponding functions and buffer memory areas can be used in all the operation modes.
The corresponding functions and buffer memory areas can be used in the normal mode (high speed: 1s/CH).
The corresponding functions and buffer memory areas can be used in the normal mode (medium speed: 10s/CH).
The corresponding functions and buffer memory areas can be used in the normal mode (low speed: 20s/CH).
The corresponding functions and buffer memory areas can be used in the simultaneous conversion mode (5s/4CH).
The corresponding functions and buffer memory areas can be used in the inter-module synchronization mode.
Ò