Mitsubishi Electric MELSEC iQ-R User Manual page 243

CH1 Offset/gain setting mode
Medium speed Low speed
Specify the channel where the offset/gain setting is adjusted.
• Offset/gain setting mode (offset specification): Channel where the offset value is adjusted
• Offset/gain setting mode (gain specification): Channel where the gain value is adjusted
Setting value
0
1
Set one of the offset specification or gain specification to Setting channel (1), and the other to Disable (0). When a value other
than 0 and 1 is set, an offset/gain setting channel range error (error code: 1E8H) occurs.
Multiple channels can be set at the same time. In that case, do not set both the offset specification and gain specification of
multiple channels to Setting channel (1).
When 'Channel change request' (YB) is turned on and the following settings are enabled, an offset/gain setting channel
specification error (error code: 1E50H) occurs.
• When both the offset specification and gain specification of the same channel are set to Setting channel (1)
• When both the offset specification and gain specification of all channels are set to Disable (0)
• When both the offset specification and gain specification of multiple channels are set to Setting channel (1) at the same
time
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Offset/gain setting mode (offset specification)
CH Offset/gain setting mode (gain specification)
■Enabling the setting
Turn on 'Channel change request' (YB).
■Default value
The default value is Disable (0) for all channels.
Setting details
Disable
Setting channel
CH1 CH2
4132 4134
4133 4135
CH3 CH4
4136 4138
4137 4139
APPX
Appendix 3 Buffer Memory Areas
A
241