Mitsubishi Electric MELSEC iQ-R User Manual page 219

High speed analog-digital converter module
Hide thumbs Also See for MELSEC iQ-R:
Table of Contents

Advertisement

CH1 Time average/Count average/Moving average/Primary delay filter constant setting
Common
Set the time (for averaging), count (for averaging), moving average count, and primary delay filter constant for when Time
average (1), Count average (2), Moving average (3), or Primary delay filter (4) is set in 'CH1 Averaging process specification'
(Un\G501).
The following table lists the setting ranges.
Setting value
1 to 5000 (ms)
4 to 62500 (times)
2 to 1000 (times)
1 to 500 (times)
• If a value other than the above is set, any of a time average setting range error (error code: 192H), count average setting
range error (error code: 193H), moving average setting range error (error code: 194H), or primary delay filter constant
setting range error (error code: 195H) occurs, and the A/D conversion processing is performed with the setting before the
occurrence of the error.
• When a moving average setting range error (error code: 194H) occurs in any channel in the normal mode (high speed:
1s/CH), the simultaneous conversion mode, or the inter-module synchronization mode, the A/D conversion stops in all
channels.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Time average/Count average/Moving average/Primary delay
filter constant setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 0 for all channels.
• Set a primary delay filter constant for the primary delay filter. The value of the time constant (ms) is the
product of the primary delay filter constant and the sampling cycle.
• Since the default value is 0, change the value depending on the processing.
• When Sampling processing (0), Low pass filter (5), High pass filter (6), or Band pass filter (7) is set in 'CH1
Averaging process specification' (Un\G501), the setting of this area is ignored.
Setting details
Time average
Count average
Moving average
Primary delay filter constant
CH1
CH2
502
702
CH3
CH4
902
1102
APPX
Appendix 3 Buffer Memory Areas
A
217

Advertisement

Table of Contents
loading

Table of Contents