4. Position the hose support with lower bolt (A) in the
forward hole, as shown. Loosen both bolts and adjust
as required.
5. Route hose bundle (A) from the windrower through
support (B) on header.
6. Route header return and pressure hose bundle (C)
through support (B) on header to the windrower.
7. Secure hose bundles with three cinch straps (B).
8. Lower and lock lever (A).
214367
ASSEMBLING THE HEADER
Figure 3.129: Hose Support
Figure 3.130: Hose Bundle
Figure 3.131: Hose Bundle
63
A
C
B
B
A
A
Revision A