Installing Other Options; Installing Tall Crop Divider - MacDon R85 Assembly Instructions Manual

3.14 Installing Other Options

Install options (if supplied with shipment) in accordance with the instructions supplied with each kit.

3.14.1 Installing Tall Crop Divider

To install the tall crop divider kit (MD #B5509), follow these steps:
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Lower header fully.
2. Stop the engine, and remove the key.
3. Unpack kit.
4. Open cutterbar doors.
5. Remove four bolts (A) from divider (B).
NOTE:
Mounting holes in header should be vacant. Remove
fasteners, if necessary.
214367
ASSEMBLING THE HEADER
Figure 3.146: Cutterbar Doors
Figure 3.147: Tall Crop Divider Kit (Left Shown,
Right Side Opposite)
71
A
B
Revision A