Attaching hydraulics using quick coupler connections:
1. Remove coupler lock as follows:
a. Remove lynch pin (A) and open up coupler
lock (B).
b. Remove lock from coupler.
2. Connect rear pump hose (A) to outboard line (D) on
windrower using coupler (C).
3. Connect front pump hose (B) to inboard line (E) on
windrower using coupler (C).
214367
ASSEMBLING THE HEADER
Figure 3.118: Hydraulic Couplers with
Coupler Lock
Figure 3.119: Hose Routing and Connections
58
A
E
C
B
B
A
B
D
A
Revision A