MacDon R85 Assembly Instructions Manual page 34

13. Invert forming shield to installation position as shown.
14. For M205 and M1240 Self-Propelled Windrowers:
Install hose support (A) to the left side of the top
shield (B) and channel (C) using two bolts and nuts (D).
15. For M200 Self-Propelled Windrowers: Install hose
support (A) to the left forming shield (B) using two
bolts (C) and flange nuts (D).
NOTE:
To operate the 4.9-meter (16-foot) header on an M200
windrower, installation of a motor/hose kit (MD #B5455)
is required.
214367
ASSEMBLING THE HEADER
Figure 3.38: Forming Shield Right Side Up
Figure 3.39: Hose Support
Figure 3.40: Hose Support
26
C
A
D
B
D
C
C
A
D
B
Revision A