MacDon R85 Assembly Instructions Manual page 35

NOTE:
If there are no mounting slots for the hose support, drill
two 11 mm (7/16 in.) holes (A) through top shield (B) and
channel (C).
214367
ASSEMBLING THE HEADER
G
Figure 3.41: Forming Shield Top View
A - Two 11 mm (7/16 in.) Holes
C - Channel
E - 320 mm (12.6 in.)
G - 19.5 mm (0.77 in.)
27
E
F
C
A
B
B - Top Shield
D - Header Forward
F - 144.8 mm (5.7 in.)
D
Revision A