MacDon R85 Assembly Instructions Manual page 4

List of Revisions
The following list provides an account of major changes from the previous version of this document.
Summary of Changes
Changed measurement format so that metric values
appear first followed by imperial in parentheses.
Added conventions to Introduction.
Added illustration, reorganized topic contents.
Updated illustration and adjusted callouts in steps.
Updated illustration and figure title.
Added step, note, and illustration for installing M200
hose support on header.
Added note to procedure.
Updated illustrations.
Updated illustrations.
Updated illustrations.
Updated topic description.
Updated procedure steps and illustrations.
Updated illustration.
Added steps for connecting header to M205 windrower
using hard plumb connections.
Added note for removing electrical harness extension
from header before connecting to M205 windrower.
Updated steps and illustrations, clarified manifold port
IDs for hydraulic connections.
Updated procedure to include steps for connecting
header to M1240 windrower using quick-connect and
hard plumb fittings.
Added note at beginning of topic and added footnote
referring users to quick coupler kits available for M1240
windrowers configured for disc headers, and auger and
draper headers.
214367
Location
Throughout the book
Introduction, page i
2 Unloading the Header, page 5
3.4 Lowering Header, page 11
3.7 Unpacking Curtains, page 18
3.9 Assembling Forming Shield, page 24
3.10 Installing Forming Shield, page 28
3.11.1 Attaching Header to an M200 or M205
Windrower: Hydraulic Center-Link with Optional
Self-Alignment, page 31
3.11.2 Attaching Header to an M200 or M205
Windrower: Hydraulic Center-Link without Optional
Self-Alignment, page 36
3.11.3 Attaching Header to an M200 Windrower:
Mechanical Center-Link, page 41
3.12 Attaching Header to an M1 Series Windrower,
page 45
3.12.1 Attaching Header to an M1240 Windrower:
Hydraulic Center-Link with Optional Self-Alignment,
page 45
3.12.2 Attaching Header to an M1240 Windrower:
Hydraulic Center-Link without Optional Self-Alignment,
page 50
3.13.1 Attaching Hydraulic and Electrical Components:
M205 Windrowers, page 56
3.13.1 Attaching Hydraulic and Electrical Components:
M205 Windrowers, page 56
3.13.2 Attaching Hydraulic and Electrical Components:
M200 Windrowers, page 61
3.13.3 Attaching Hydraulics and Electrical: M1240
Windrowers, page 67
3.13.3 Attaching Hydraulics and Electrical: M1240
Windrowers, page 67
ii
Revision A