MacDon R85 Assembly Instructions Manual page 59

CAUTION
To prevent damage to the header lift linkages when
lowering header lift legs without a header or weight box
attached to the windrower, ensure the float springs
tension is fully released.
NOTE:
If not prompted by the HPT display to remove header
float, remove header float manually by doing the
following:
4. Press rotary scroll knob (A) on Harvest Performance
Tracker (HPT) to highlight QUICK MENU options.
5. Rotate scroll knob (A) to highlight the HEADER FLOAT
symbol (B) and press scroll knob to select. Screen
changes.
6. Press soft key 3 (A) to remove the header float.
NOTE:
If the header float is active, the icon at soft key 3 will say
REMOVE FLOAT; if header float has been removed, the
icon will say RESUME FLOAT.
214367
ASSEMBLING THE HEADER
Figure 3.101: Header Float Spring
Figure 3.102: HPT Display
Figure 3.103: HPT Display
51
A
B
A
Revision A