Installing Skid Shoes (Optional) - MacDon R85 Assembly Instructions Manual

3.2 Installing Skid Shoes (Optional)

NOTE:
This kit may be installed later in the assembly sequence, but installation may be easier prior to laying the header
down.
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Lower header to the ground, shut off engine, and remove key from ignition.
2. Unpack kit.
3. Install skid shoes. Refer to instruction supplied with kit.
214367
ASSEMBLING THE HEADER
Figure 3.4: Skid Shoe (Right Side Shown – Left
Side Similar)
9
Revision A