MacDon R85 Assembly Instructions Manual page 22

3. Remove the three bolts (A) securing left stand (B) to
shipping channel plate and shield.
4. Remove bolt (A) securing shipping stand to header
lifting arm.
5. Remove hairpin from pin (B).
6. Hold shipping stand, and remove pin (B).
7. Remove stand (C) and discard. Reinsert pin (B) in
header lifting arm, and secure with lynch pin.
8. Repeat Step 3, page 14
other stand.
9. Raise baffle (A) with handle, and temporarily secure in
raised position with wire.
214367
ASSEMBLING THE HEADER
to Step 7, page 14 for
B
Figure 3.10: Shipping Stand (Left Side Shown –
Right Side Opposite)
Figure 3.11: Shipping Stand (Left Side Shown –
Right Side Opposite)
Figure 3.12: Shipping Stands
14
A
A
A
B
C
A
Revision A