MacDon R85 Assembly Instructions Manual page 60

7. Press HEADER DOWN button (A) on the ground speed
lever (GSL) to fully retract header lift cylinders.
8. Drive the windrower slowly forward until the windrower
feet (A) enter the header supports (B). Continue driving
slowly forward until the feet engage the supports and
the header nudges forward.
9. Ensure that lift linkages are properly engaged in
header legs.
10. Press HEADER TILT UP (A) and HEADER TILT
DOWN (B) cylinder switches on the GSL to extend or
retract center-link cylinder until the hook is aligned with
the header attachment pin.
11. Stop engine and remove key from ignition.
214367
ASSEMBLING THE HEADER
Figure 3.104: Ground Speed Lever
Figure 3.105: Header Support
Figure 3.106: Ground Speed Lever
52
A
A
B
B
A
Revision A