10. Remove two bolts (A) attaching shipping channel (B) to
frame. Retain hardware.
11. Remove the two bolts (A) attaching shipping
channel (B) to frame. Retain hardware.
12. Remove wire and lower baffle so that channel can
be removed.
13. Remove and discard channel (B).
14. Reinstall two bolts (A) through frame and tighten.
214367
ASSEMBLING THE HEADER
Figure 3.13: Shipping Stand (Left Side Shown –
Right Side Opposite), Baffle Not Shown
for Clarity
Figure 3.14: Shipping Stand (Left Side Shown –
Right Side Opposite)
Figure 3.15: Frame with Shipping
Stand Removed
15
A
B
A
B
A
Revision A