Attaching Header To An M200 Or M205 Windrower: Hydraulic Center-Link Without Optional Self-Alignment - MacDon R85 Assembly Instructions Manual

3.11.2 Attaching Header to an M200 or M205 Windrower: Hydraulic
Center-Link without Optional Self-Alignment
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Remove hairpin (B) from clevis pin (A) and remove
clevis pin from the header supports (C) on both sides of
the header.
CAUTION
To prevent damage to the lift system when lowering
header lift linkages without a header or weight box
attached to the windrower, ensure the float
engagement pin is installed in storage position (B) and
NOT in engaged position (A).
214367
ASSEMBLING THE HEADER
Figure 3.61: Header Support
Figure 3.62: Header Float Linkage
36
C
B
A
B
A
Revision A