Attaching Hydraulics And Electrical: M1240 Windrowers - MacDon R85 Assembly Instructions Manual

21. Move platform (A) to the CLOSED position. For
instructions, refer to the windrower operator's manual.

3.13.3 Attaching Hydraulics and Electrical: M1240 Windrowers

NOTE:
Factory-installed hard plumb connections are ideal for attaching an R85 disc header's hydraulics on an M1240
windrower. If an auger header or draper header will also be used on a disc header-ready M1240 windrower, quick
couplers can be ordered and installed to make switching between these headers easier
1. Approach platform/stair unit (A) on left cab-forward side
of windrower and ensure cab door is closed.
2. Push latch (B), and pull platform (A) toward walking
beam until it stops and latch engages.
2. Order two (MD #B6277) kits for use on an M1240 windrower factory-configured for a disc header only. Order
one (MD #B6277) kit for use on an M1240 windrower factory-configured for auger and draper headers.
214367
ASSEMBLING THE HEADER
Figure 3.138: Top View of Windrower
Figure 3.139: Left Cab-Forward Platform
67
A
2 .
A
B
1015479
Revision A