Attaching Hydraulic And Electrical Components: M200 Windrowers - MacDon R85 Assembly Instructions Manual

6. Move windrower platform (A) to the CLOSED position.
For instructions, refer to the windrower operator's
manual.

3.13.2 Attaching Hydraulic and Electrical Components: M200 Windrowers

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
IMPORTANT:
To operate the 4.9-meter (16-foot) header on an M200
windrower, a hydraulic drive kit (MD #B5455) is required.
Install kit in accordance with the supplied kit instructions.
214367
ASSEMBLING THE HEADER
Figure 3.125: Windrower with Left Platform in
Closed Position
Figure 3.126: MD #B5455 Hydraulic Drive Kit
61
A
Revision A