MacDon R85 Assembly Instructions Manual page 65

2. Route hose bundle (A) from the header under the
windrower frame, and insert pin (B) into hole in
windrower frame.
3. Place hoses on support (C) and on the hose support on
the forming shield (not shown).
4. Remove protective plugs (A) from ends of
hydraulic hoses.
214367
ASSEMBLING THE HEADER
Figure 3.116: Hydraulic Hoses
Figure 3.117: Protective Shipping Plugs on R85
Hydraulic Hoses
57
B
A
A
C
Revision A