Unpacking Curtains - MacDon R85 Assembly Instructions Manual

3.7 Unpacking Curtains

1. Remove two bolts (A) securing cutterbar doors
to frame.
2. Remove shipping wire (B) from around curtains.
WARNING
Ensure cutterbar is completely clear of foreign objects.
These objects can be ejected with considerable force
when the machine is started and may result in serious
injury or machine damage.
3. For export headers, insert a screwdriver (or equivalent)
through hole (A) in door into notch in latch (B) and push
latch to disengage.
214367
ASSEMBLING THE HEADER
Figure 3.21: Cutterbar Door and Curtain
Secured for Shipping (View From Below
Cutterbar Door)
Figure 3.22: Export Headers: Latch on Cutterbar
Doors
18
B
A
B
B
A
1023080
Revision A