Safety Messages; Introduction - Emerson Rosemount 5900S Series Reference Manual

Radar level gauge
Hide thumbs Also See for Rosemount 5900S Series:
Table of Contents

Advertisement

Reference Manual
00809-0100-5900, Rev CA
June 2014
Section 1
1.1 SAFETY
MESSAGES
www.rosemount-tg.com

Introduction

1.1
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
1.2
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2
1.3
Manual Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-3
1.4
Technical Documentation . . . . . . . . . . . . . . . . . . . . page 1-4
1.5
Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-5
1.6
Product Recycling/ Disposal . . . . . . . . . . . . . . . . . . page 1-5
1.7
Packing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-5
Procedures and instructions in this manual may require special precautions to
ensure the safety of the personnel performing the operations. Information that
raises potential safety issues is indicated by a warning symbol (
the safety messages listed at the beginning of each section before performing
an operation preceded by this symbol.
Failure to follow these installation guidelines could result in death or serious
injury:
• Make sure only qualified personnel perform the installation.
• Use the equipment only as specified in this manual. Failure to do so may
impair the protection provided by the equipment.
Explosions could result in death or serious injury:
• Verify that the operating environment of the transmitter is consistent with the
appropriate hazardous locations certifications.
• Before connecting a communicator in an explosive atmosphere, make sure the
instruments in the loop are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
• Do not remove the gauge cover in explosive atmospheres when the circuit is
alive.
Electrical shock could cause death or serious injury.
• Use extreme caution when making contact with the leads and terminals.
Any substitution of non-recognized parts may jeopardize safety. Repair, e.g. substitution
of components etc., may also jeopardize safety and is under no circumstances allowed.
Rosemount 5900S Series
). Refer to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents