Emerson Rosemount 5900S Series Reference Manual page 30

Rosemount 5900S Series
3-2
High voltage that may be present on leads could cause electrical shock:
Avoid contact with leads and terminals.
Make sure the main power to the transmitter is off and the lines to any other external
power source are disconnected or not powered while wiring the gauge.
The device is designed for installation in complete enclosed container to prevent
unwanted RF emission. Installation must be in accordance with local regulations and
may require local radio approvals.
Installation in open air applications may be subject for site license approval.
Installation shall be done by trained installers, in compliance with the manufacturer's
instructions.
Reference Manual
00809-0100-5900, Rev CA
NOTICE
Section 3. Installation
June 2014