Emerson Rosemount 5900S Series Reference Manual page 229

Reference Manual
00809-0100-5900, Rev CA
June 2014
Index
Parameter
Number
26 SHED_RCAS
27 SHED_ROUT
64 SIMULATE_IO
66 SIMULATE_STATE
01 ST_REV
63 START_WITH_DEFAULTS
03 STRATEGY
56 SUMMARY_STATUS
02 TAG_DESC
08 TEST_RW
35 UPDATE_EVT
40 WRITE_ALM
34 WRITE_LOCK
39 WRITE_PRI
44 XD_OPTION
Appendix C. F
OUNDATION
Time duration at which to give up on computer writes to function block RCas locations.
Shed from RCas shall never happen when SHED_ROUT = 0
Time duration at which to give up on computer writes to function block ROut locations.
Shed from ROut shall never happen when SHED_ROUT = 0
Status of simulate switch.
The state of the simulate switch:
0 = Uninitialized
1 = Switch off, simulation not allowed
2 = Switch on, simulation not allowed (need to cycle jumper/switch)
3 = Switch on, simulation allowed
The revision level of the static data associated with the function block.
0 = Uninitialized
1 = do not power-up with NV defaults
2 = power-up with default node address
3 = power-up with default pd_tag and node address
4 = power-up with default data for the entire communications stack (no application data)
The strategy field can be used to identify grouping of blocks.
An enumerated value of repair analysis.
0 = Uninitialized
1 = No repair needed
2 = Repairable
3 = Call service center
The user description of the intended application of the block.
Read/write test parameter - used only for conformance testing.
This alert is generated by any change to the static data.
This alert is generated if the write lock parameter is cleared.
When hardware write protection is selected, WRITE_LOCK becomes an indicator of the
jumper setting and is unavailable for software write protection.
When software write lock is selected, and WRITE_LOCK is set, no writings from
anywhere else are allowed, except to clear WRITE_LOCK. Block input will continue to be
updated.
Priority of the alarm generated by clearing the write lock.
Indicates which transducer block licensing options are enabled.
Fieldbus Block Information
Rosemount 5900S Series
Description
C-5