(1) The hardware and software write lock select bits are mutually exclusive and the hardware select has the highest priority. When the HARDW_LOCK bit if
set to 1 (on), the SOFTW_LOCK bit is automatically set to 0 (off) and is read only.
4.13.2 MAX_NOTIFY
Section 4. Configuration
SECURITY
SWITCH
WRITE_LOCK
NA
1 (unlocked)
NA
1 (unlocked)
NA
2 (locked)
NA
2 (locked)
0 (unlocked)
1 (unlocked)
1 (locked)
2 (locked)
1 (locked)
2 (locked)
The MAX_NOTIFY parameter value is the maximum number of alert reports
that the resource can have sent without getting a confirmation, corresponding
to the amount of buffer space available for alert messages. The number can
be set lower, to control alert flooding, by adjusting the LIM_NOTIFY
parameter value. If LIM_NOTIFY is set to zero, then no alerts are reported.