Emerson Rosemount 5900S Series Reference Manual page 117

Reference Manual
00809-0100-5900, Rev CA
June 2014
Section 4. Configuration
Now you can check the calibration result by opening the Calibration window
again:
Note that all measured values are adjusted according to the calculated
Calibration Distance and Correction Factor. In the Calibration Data window
you can also see that the level values measured by the 5900S gauge are
adjusted. Of course, the hand dipped levels are unaltered.
NOTE!
When calibration is finished do not change the Calibration Distance in the
Properties/Tank Geometry window.
Rosemount 5900S Series
4-33