Overview; Safety Messages - Emerson Rosemount WPG Reference Manual

Reference Manual
00809-0100-4045, Rev AB
Section 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Impulse piping considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Process connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11
Rosemount manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11
2.1

Overview

The information in this section covers installation considerations. A Quick Start Guide
(document number 00825-0100-4045) is shipped with every device to describe basic
installation and startup procedures. Dimensional drawings for the Rosemount
Pressure Gauge can be found in
2.2

Safety messages

Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operation. Information that raises potential safety
issues is indicated with a warning symbol (
before performing an operation preceded by this symbol.
Explosions could result in death or serious injury.
Installation of device in an explosive environment must be in accordance with
appropriate local, national and international standards, codes, and practices.
Ensure device is installed in accordance with intrinsically safe or non-incendive field
practices.
Electrical shock can result in death or serious injury.
Care must be taken during transportation of device to prevent electrostatic charge
build-up.
Device must be installed to ensure a minimum antenna separation distance of 8 in.
(20 cm) from all persons.
Process leaks could result in death or serious injury.
Handle the device carefully.
Failure to follow safe installation guidelines could result in death or serious injury.
Only qualified personnel should install the equipment.
Hardware Installation
Hardware Installation
Appendix A: Specifications and Reference
Hardware Installation
). Refer to the following safety messages
March 2016
™
Wireless
Data.
5