Overview - Emerson Rosemount 5900S Series Reference Manual

Reference Manual
00809-0100-5900, Rev CA
June 2014

4.2 OVERVIEW

Section 4. Configuration
The 5900S can be installed in Rosemount Tank Gauging systems including
2160 Field Communication Units and Rosemount 2410 Tank Hubs. The
5900S also supports installation in F
of the 5900S is a simple and straight-forward procedure. In a Rosemount
Tank Gauging system with 2410 Tank Hub and 2160 Field Communication
Unit it basically includes the following steps:
1. Preparations: make a note of Unit ID, Modbus address
tank geometry parameters such as tank height, tank type, strapping table
2. Set up communication protocol and communication parameters.
3. Configuration of the Rosemount 2160 Field Communication Unit.
4. Configuration of the Rosemount 2410 Tank Hub.
5. Configuration of field devices such as the Rosemount 5900S Radar
Level Gauge and 2240S Multiple-Input Temperature Transmitter.
6. Calibration of the 5900S level gauge.
Installation of the 5900S in F
complete set of Resource, Function, and Transducer blocks. You can easily
integrate the 5900S level gauge into any existing F
network by using an appropriate configuration tool such as the AMD Device
Manager. See section "F
more information.
The TankMaster WinSetup program is the recommended tool for installation
and configuration of a Rosemount 5900S Radar Level Gauge in systems that
include the 2410 Tank Hub. The 5900S is preferably installed as part of the
procedure when installing a Rosemount 2410 Tank Hub.
This is the standard procedure for installing a 5900S Radar Level Gauge:
1. Start by installing and configuring the 2410 Tank Hub by using the device
installation wizard in TankMaster WinSetup.
2. Finish the 2410 installation procedure. Ensure that automatic installation
of field devices is enabled. The 2410 Tank Hub, the 5900S Level Gauge,
and other field devices on the Tankbus will automatically appear in the
WinSetup workspace.
3. Configure the 5900S level gauge via the Properties window.
If a 5900S is added to an existing system the Rosemount 2410 tank database
must be updated before the 5900S is configured. The tank database maps
the 5900S to the tank on which it is installed.
A detailed description of how to install and configure a Rosemount 5900S and
other devices by using the TankMaster WinSetup software is provided in the
Raptor System Configuration manual (Document no. 300510EN).
NOTE!
If the system contains a 2160 Field Communication Unit (FCU) it should be
installed and configured before other devices such as level gauges and
temperature multiplexers.
See section "F
OUNDATION
information on installing the 5900S in F
(1) See the System Configuration manual (Document no. 300510EN)
Rosemount 5900S Series
fieldbus systems. Installation
OUNDATION
fieldbus systems is supported by a
OUNDATION
Fieldbus Overview" on page 4-34 for
OUNDATION
Fieldbus Overview" on page 4-34 for more
OUNDATION
(1)
, antenna type,
fieldbus
OUNDATION
fieldbus systems.
4-3