Emerson Rosemount 5900S Series Reference Manual page 57

Reference Manual
00809-0100-5900, Rev CA
June 2014
Weather
Protection Hood
Finger Nut
Upper Nut
Section 3. Installation
Rosemount 5900S Series
19. In case the Weather Protection Hood
was removed, put it back on top of
the transmitter head and tighten the
screw.
20. Tighten the upper nut to lock the
finger nut (you may temporarily
remove the transmitter head to make
room for tools if needed), and secure
by folding the tab washer over the
nut.
21. Connect the electrical cabling and
configure the gauge by using the
TankMaster WinSetup software (see
the Raptor System Configuration
Manual, Document No. 300510EN).
3-29