Safety Messages - Emerson Rosemount 8782 Reference Manual

Hazard messages
November 2019
1.1

Safety messages

WARNING
General hazards. Failure to follow these instructions could result in death or serious
injury.
• Read this manual before working with the product. For personal and system safety,
and for optimum product performance, make sure you thoroughly understand the
contents before installing, using, or maintaining this product.
• Installation and servicing instructions are for use by qualified personnel only. Do not
perform any servicing other than that contained in the operating instructions, unless
qualified.
• Verify the installation is completed safely and is consistent with the operating
environment.
• Do not substitute factory components with non-factory components. Substitution of
components may impair Intrinsic Safety.
• Do not perform any services other than those contained in this manual.
• Process leaks may result in death or serious injury.
• Mishandling products exposed to a hazardous substance may result in death or
serious injury.
• The electrode compartment may contain line pressure; it must be depressurized
before the cover is removed.
• If the product being returned was exposed to a hazardous substance as defined by
OSHA, a copy of the required Safety Data Sheet (SDS) for each hazardous substance
identified must be included with the returned goods.
• The products described in this document are NOT designed for nuclear-qualified
applications. Using non-nuclear qualified products in applications that require
nuclear-qualified hardware or products may cause inaccurate readings. For
information on Emerson nuclear-qualified products, contact your local sales
representative.
8
®
Rosemount 8782 Slurry Magnetic Flow Meter Transmitter with HART Protocol
Reference Manual
00809-0100-8782