Chapter 2 Introduction; Overview - Emerson Rosemount 8800D Series Reference Manual

Vortex flow meter with modbus protoco
Hide thumbs Also See for Rosemount 8800D Series:
Table of Contents

Advertisement

Reference Manual
00809-0400-4004
2
Introduction
2.1

Overview

System description
The Vortex Flow Meter consists of a meter body and transmitter, and measures volumetric
flow rate by detecting the vortices created by a fluid passing by the shedder bar.
The meter body is installed in-line with process piping. A sensor is located at the end of the
shedder bar which creates a sine wave signal due to the passing vortices. The transmitter
measures the frequency of the sine wave and converts it into a flow rate.
Safety messages
Procedures and instructions in this manual may require special precautions to ensure the
safety of the personnel performing the operations. Refer to the safety messages listed at
the beginning of this document, before performing any operations.
Chapters
Section
Pre-installation
Basic installation
Basic
configuration
Advanced
installation
Advanced
configuration
Operation
Troubleshooting
Maintenance
Appendixes
Appendixes include supplementary information that may be useful in some situations.
Reference Manual
Who uses
Description
Planners and
Reference information to help you verify compatibility
installers
between the meter and its application and installation
location
Planners and
Mechanical and electrical installation instructions typically
installers
required as initial setup in all applications
Operations
Configuration parameters typically required as initial setup
technicians
in all applications
Installers
Installation procedures required after initial setup for
some applications
Operations
Configuration procedures required after initial setup for
technicians
some applications
Operations
Information on advanced configuration parameters and
technicians
functions that can aid in maintaining the flow meter
Installers and
Troubleshooting techniques, diagnostic information, and
operations
transmitter verification procedures
technicians
Operations
Information on maintaining the flow meter
technicians
Introduction
October 2021
9

Advertisement

Table of Contents
loading

Table of Contents