3.00 TST command (Test)
Before executing the device test, change the
status of the target device to "Out of Service" by
entering OUS command.
Command Format
OPE>TST + Index + Item1 + (& Item 2)
Test
Card Test
PITS
P
ATT
O
R
T
Extension & CO line
T
SLC, HLC, OPX,
E
S
LCOT, GCOT
T
Basic Conference Trunk
Optional Conference Trunk
DISA/AGC
P
PITS
I
T
S
&
ATT
A
T
T
Description
x : Shelf No. (1: Basic 2: Expansion 1
3: Expansion 2)
yy : Slot No. (01~15, or **)
zz : Port No. (1~8, or *)
a : Attendant console No. (1~2, or *)
dddd : Directory No. (3~4 digits)
tt : Basic Conference Trunk No. (01~08)
tt : Optional Conference Trunk No. (01~64)
Index
Item 1
1
Physical No. (xyy)
Physical No. (xyyz) or
DN (DN dddd)
Physical No. (xyyz) or
ATT No. (Aa)
(Extension) Physical No. (xyyz) or
DN (DN dddd)
2
(CO line) Physical No. (xyyz)
CFB tt (01 ~ 08)
CFO tt (01 ~ 64)
Physical No. (xyyz)
Physical No. (xyyz) or
DN (DN dddd)
3
Physical No. (xyyz) or
ATT No, (Ax)
15-E-5
(70695)
(Refer to Section 15-C-1.00 "Service Commands
and Their Functions." for details about OUS and
INS commands)
(CO line) Physical No. (xyyz)
(Extension) Physical No. (xyyz) or
DN (DN dddd)
"*" can be used as a wild card character and
substitutes any number from 0 to 9.
(Example)
1** ------- All cards installed in the Basic shelf
105* ----- All ports assigned to the card No.5 in
the Basic shelf
2*** ------ All ports in the Expansion shelf 1
Item 2