Panasonic KX-T336 System Reference Manual page 1526

Hide thumbs Also See for KX-T336:

Table of Contents

D: Enter appropriate parameters directly.

S: Select appropriate parameters from the factory-set options.

• Cursor is scrolled from left to right by pressing the return key.

• Assign extension card and trunk card for power failure transfer in pairs.

To assign only a trunk or an extension is not possible.

Refer to Section 9-L-2.00 "Power Failure Transfer Assignment" for further

information about programming.

SLT telephones and some PITS telephones can

be used during power failure if power failure

transfer assignment had been done in advance.

The following PITS telephones can be used

during power failure.

KX-T123230, KX-T123230D,

KX-T123235, KX-T61630, KX-T30830

When you are using above listed PITS tele-

phones, set the POWER FAILURE switch to ON,

when power failure occurs.

If dialing cannot be done, set the DIALING MODE

selector to another position (PULSE or TONE).

When the power is restored, set the POWER

FAILURE switch to OFF.

If the power is restored during a conversation, set

the POWER FAILURE switch to OFF after

conversation is completed.

Assign LCOT or GCOT card No. to the

system which are available for power

failure transfer.

Assign HLC or SLC card No. to the

system which are available for power

failure transfer.

1,2,3 or blank

01-15 or blank

1,2,3 or blank

01-15 or blank

Show Quick Links

Table of Contents