2.00 TFD command (Traffic Display)
Displays traffic measurement for extensions, trunk
groups, attendant consoles and resources.
Command Format
OPE>TFD + Index + Item1 + (Item2)
Index
Station
1
Trunk Group
2
ATT
3
DISA
4
OGM1
5
OGM2
6
AGC
7
Description
1. Station
Displays traffic measurements of all extensions.
2. Trunk Group
Displays traffic measurements of each trunk
group.
3. Attendant Console
Displays traffic measurements of each attendant
console.
4. DISA, OGM1, OGM2, AGC
Displays traffic measurements of each resource.
If tenant service is assigned to the system,
traffic measurements of each resource will be
displayed by each tenant individually.
Item1
The first half = 1
The second half = 2
Trunk Group No.
(01~16)
ATT No.
(1 or 2)
The first half = 1 (Tenant 1)
The second half = 2 (Tenant 2)
15-F-6
Item 2
The first half = 1
The second half = 2
The first half = 1
The second half = 2
Programming
Set desired start time in "System-Operation" Start
Time of Traffic Measurement.
Refer to Section 10-C-4.00 "Operation (OPR)" for
programming.