Panasonic KX-T336 System Reference Manual page 1564

G. Other Features
1.00 PFT command (Power
Failure Transfer)
Description
Provides up to 18 extension/CO cards pairs to
maintain a conversation when power is restored
or TSW recovery.
If this is not programmed then power restoration
or TSW recovery drops any existing conversa-
tions.
Command Format
PRG > PFT + AT+ (Index)
Index = PFT No. (01 ~ 18)
Screen display
; PRG > PFT SH01 <CR>
; PFT No. 01
; 1 : Trunk Slot No.------------------------------------ 101
; 2 : Extension Slot No. ------------------------------ 107
; PFT No. 02
; 1 : Trunk Slot No.------------------------------------ 102
; 2 : Extension Slot No. ------------------------------ 108
;
;
;
; PFT No. 18
; 1 : Trunk Slot No.------------------------------------ 206
; 2 : Extension Slot No. ------------------------------ 212
; PRG >
Item Data
1 101~315
2 101~315
Refer to Section 10-C-47.00 "Power Failure
Transfer (PFT)," for further information about
programming.
Assign LCOT, GCOT, RCOT or PCOT card No. which is
available for power failure transfer
Assign HLC or SLC card No. which is available for power
failure transfer
15-G-1
(70695)(E) (70695)
Conditions
In case of the KX-T96174X (SLC card), three
ports (ports 1 through 3) are available for Power
Failure Transfer Assignment.
Explanation