Rear-Wheel Stand - BMW F800GT Rider's Manual

9
96
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
z
with centre stand
ATTENTION
Centre stand retracts if the
vehicle lifted too high
Risk of damage to parts if vehicle
topples
When raising the vehicle, make
sure that the centre stand re-
mains on the ground.
If necessary, adjust the height
of the front-wheel stand.
Make sure the motorcycle is
standing firmly.

Rear-wheel stand

Install the rear-wheel
stand
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use basic stand with rear axle
adapter. The basic stand and
its accessory components
are available from your
OE
BMW Motorrad authorised
dealer.
Use screws 1 to set the rear-
wheel stand to the desired
height.
Remove retaining disc 2. To
do so, press release button 3.